For more information, go to Problem Solvers Application Ideas.

Detailed product data sheets are available in PDF format by clicking on the product names below. PDF files require Adobe Reader, which can be downloaded free from Adobe's Web site.

Featured Interface Solutions
Model	Input	Output	Power	Mounting
NCS NET Concentrator System®  Process Control and Distributed I/O System Get Data Sheet ncs.pdf (685K )	Universal and Modular I/O Blocks Program Over the Web and Using PC Software Current Any range from 0 to 20mA including: 0-20mA 4-20mA Voltage Any range from -10 to 10Vdc including: 1-5Vdc 0-10Vdc -10-10Vdc RTD 2-, 3-, 4-Wire 100-1000ohm Platinum, Nickel and Copper Thermocouple J, K, E, T, R, S, B, N, C Potentiometer 100-1000ohms Millivolts -50-1000mV Communication Link Simultaneous Ethernet and Dual MODBUS RTU (RS-485)	Universal and Modular I/O Blocks Program Over the Web and Using PC Software Current Any range from 0-20mA including: 0-20mA 4-20mA Voltage Any range from 0-10Vdc including: 1-5Vdc 0-10Vdc Discrete High/Low Open/Close On/Off Relay Communication Link Simultaneous Ethernet and Dual MODBUS RTU (RS-485)	4-Wire, Line-Powered (20-30Vdc)	Modular DIN-style (G-type and Top Hat rails)
MNCS  microNCS MODBUS RTU Master and Distributed I/O System Get Data Sheet mncs.pdf ( 687K )	Standard 4 or 8 Input Channels Individually Program Over the Web 4-20mA Expandable with NCS NET Concentrator System® Expansion I/O Modules for Voltage, RTD Thermocouple and Discrete Inputs, and Relay Outputs Standard 4 Discrete (Contact Closure) Inputs Optional Dial-Up Modem for Programming and Monitoring Inputs and Outputs	Standard Communication Links per Module Dual MODBUS RTU (RS-485) Ports One Ethernet Port	4-Wire, Line-Powered (20-30Vdc) Universal for any range between 90-260Vac	Modular DIN-style (G-type and Top Hat rails)
Get Data Sheet wnm.pdf (292K) Get Wireless Possibilities White Paper wireless_possibilities.pdf (195K ) NET Concentrator System® Wireless Network Module When wires can't be run for practical or economic reasons, our Wireless Network Module (Model WNM) provides accurate and reliable wireless connectivity between remote field sites. A bi-directional, spread spectrum radio modem, the WNM is ideal for use with Moore Industries' NET Concentrator System, and with similar distributed I/O systems, to overcome rugged, long-distance or normally impassable environments. You can send just a few, or thousands of, process signals over one low-cost wireless communication link. Highly reliable Intelligent Spectrum Frequency Hopping Technology Standard operating frequencies of 902-928MHz and 2.4-2.483GHz Long distance transmission of up to 30 miles (48km) Supports Ethernet and serial communications FCC site license is not required User configurable operating parameters
CPMS  Cathodic Protection Monitoring System Get Data Sheet cpms.pdf ( 498K )	Standard 4 or 8 Cathodic Protection Monitoring Channels Individually Rangeable Over the Web 0-100Vdc 0-100mV -5 to +5Vdc 4-20mA Expandable with NCS NET Concentrator System® Expansion I/O Modules for Voltage, RTD, Thermocouple and Discrete Inputs, and Relay Inputs Standard 4 Discrete (Contact Closure) Inputs Optional Dial-Up Modem for Programming and Monitoring Inputs and Outputs	Standard Communication Links per Module Dual MODBUS RTU (RS-485) Ports One Ethernet Port	4-Wire, Line-Powered (20-30Vdc) Universal for any range between 90-260Vac	Modular DIN-style (G-type and Top Hat rails)
I/O EQUATION STATION® Multifunction Distributed I/O System Get Data Sheet mds.pdf (362K )	Multiple Channels are PC-Programmable Current/Voltage 0-25mA -10 to 10 Vdc -625 to +625mV RTD 2-, 3-, 4-Wire; Platinum, Nickel, and Copper Thermocouple J, K, E, T, R, S, B, N, U, L Bridge Potentiometer Resistance Digital High/Low Status Frequency Pulse or Up/Down Counter RS-485 COMM Link MODBUS RTU PROFIBUS	Multiple Channels are PC-Programmable Analog 0-20mA Digital Host Controlled Process Controlled RS-485 COMM Link MODBUS RTU PROFIBUS	4-Wire, Line-Powered (10-30Vdc)	Thermoplastic, DIN-style (Top Hat rail)
CCS® Cable Concentrator System® Get Data Sheet ccs.pdf (361K )	Selectable with On-Board Controls Input Module Analog 0-20mA 0-10Vdc Discrete High/Low Open/Close On/Off Output Module RS-485 COMM Link Proprietary for peer-to-peer systems MODBUS RTU for peer-to-host systems	Selectable with On-Board Controls Output Module Analog 0-20mA 0-10Vdc Discrete High/Low Open/Close On/Off Relay Input Module RS-485 COMM Link Proprietary for peer-to-peer systems MODBUS RTU for peer-to-host systems	4-Wire, Line-Powered (18-30Vdc)	High-Density Aluminum DIN-style (G-type and Top Hat rails)
Complementary Distributed I/O and Data Communication Systems Accessories Ethernet Switches (Switching Hubs) Intelligent multi-port communications switches automatically determine and remember where a NET Concentrator System® Station is located, and routs messages only through the appropriate port to that Station. This minimizes network loading and improves deterministic communications over Ethernet. Ethernet Hubs Enables multiple NET Concentrator System® stations or other compatible devices to be connected on a common Ethernet data link. Ethernet Routers Connects multiple NET Concentrator System® segments or sub-networks, forwards messages from one network to another, and provides message traffic isolation between segments. RS-485 to RS-232C/RS-422 Converter For MODBUS (RS-485) networks, converts the RS-485 signal to either RS-232C or RS-422 standard to allow direct interface with a modem or computer-based systems, such as a PC. RS-485 Repeater Extends a MODBUS-communicating system's allowable transmission distance an additional 10,000 feet over its limit.       Wireless RF Modems Where wires can't be run for practical or economic reasons, spread spectrum wirless radio (RF) communication provides accurate and reliable connectivity between sites. Distances between modems can be up to 20 miles, and repeaters can extend coverage even further. Short Haul Modems For MODBUS (RS-485) networks, the Short Haul Modem extends the a I/O system's allowable transmission distance to 10 miles (16km). Dial-Up Modems The Dial-Up (or Dedicated Modem) permits unlimited transmission distances over a regular switched telephone line or leased dedicated line. Data Line (Surge) Protectors Data Line (Surge) Protectors Mounts on a G-type rail next to the NCS to protect the data link from damaging voltage and current surges caused by lightning, welding, heavy electrical equipment, and switch gears. Instrument Power Supplies A complete line of instrument power supplies for mounting alongside and powering our Distributed I/O systems. Redundant Power Supply DIN-style, rail-mount module accepts two power supply inputs and provides an uninterrupted power source by passing the highest voltage.